Mantic Street with ER² is a clutch kit specifically designed for the performance market. It features the patented groove design, ER², which is CNC machined on the friction face of the pressure plate. Capable of transmitting greater than 60% more torque than a standard clutch kit, Mantic Street with ER² is suitable for high performance vehicles. This overall torque capacity increase has been achieved by higher clamp loads, increased Mean Effective Radius of the friction area, better cooling of the pressure plate and higher coefficient of friction materials on the clutch disc. These design innovations directly equate to higher torque capacity. The clutch disc features an organic facing ring in contact with the pressure plate and a segmented cerametallic facing on the flywheel side. The cover assembly also features a decorative and corrosion resistant finish. The kit includes bearing, pressure plate, clutch disc, flywheel and bolts.
|Rated Torque (ft lbs)||550 ft lbs (750Nm)|
|Disc Spline||1 1/8" (29.5mm)|
|Disc No. Teeth||26|
|Disc Type||Sprung Centre Cushioned|
|Disc Material||Organic & Cerametallic|
|Concentric Slave Cylinder including Bearing||No|
Most products ship within 1 to 7 business days. Some products are “build to order” and may take longer. To check the availability of a product, please contact us.
Shipping Policy: We will ship to the credit card billing address or confirmed PayPal address only. Call us if you have any questions or need to make other arrangements.
Products sold on this website are intended for “off-road” use and may not conform to local emissions laws. Please verify your local emissions regulations before street use.
WARNING: The products we sell can put you near a vehicle, which emits chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.. Please review the link before purchase. www.p65warnings.ca.gov
New Era Performance branded products carry a limited lifetime warranty on craftsmanship unless otherwise specified. Warranty claims on all other products should be directed to the original manufacturer of that product.
Returns are accepted within 30 days of original purchase. Items must be unopened, uninstalled and in original packaging. A 20% re-stocking fee applies to all returns. Shipping is non-refundable. Prior authorization required for all returns.